COILED PINS HEAVY DUTY Type CPH & CPHS - To BS 7057, ISO 8748

	Material: CPH CPHS Carbon Steel CS 70 Austenitic Stainless Steel Finish: CPH CPHS Self colour with protective lubricant Self colour
	1) The hole diameter shall be equal to the nominal diameter of the respective pin taking into account the tolerance range H12. For pins with nominal diameter d1< 1.2mm the tolerance for the hole shall be H 10. 2) In individual cases it should be checked whether, depending on the design criteria, the given shear strength can be used. The shear strengths tests are carried out in accordance with ISO 8749. 3) Only applies to steel coiled pins. 4) Only applies to austenitic stainless steel coiled pins. 5) Coiled pins of austenitic stainless steel can only be manufactured in lengths up to a maximum of 50mm. Ordering example: Pin type - Nom Dia. x length E.g. - CPS 4.0 x 10 For standard pin in Steel 4.0mm dia. x 10mm long